CNC'd Vertically Laminated Wood core:  We Engineer all of our cores from different blends of wood. Our  wood core blocks are then cut on a CNC machine to our exacting specifications.
UHMW Base and Sidewalls:  We use only Ultra High Molecular Weight Plastics on all our skis.  This not only gives amazing strength and durability, but also gives us a uniform bonding material that is made in the U.S.A.

Full Rocker: This is our most aggressive rocker profile.  The tips and tails on these designs have 3" of ground clearance when sitting flat on the snow.  Full Rocker floats like a boat in the deepest of snow.

LowFat Rocker: This is a lower rise, less aggressive rocker that gives the ski float and playfulness. This also allows us to use longer side cuts that stretch farther into the skis tips and tails creating greater carving stability.

CamberCut: We use different amounts of camber and side cut that are matched to our rocker skis.  This allows us to get amazing float and playfulness without a sacrifice in carving ability.  Float powder, carve hard pack, charge crud; the best of all worlds.

Quick Release Camber: A light 2mm rocker in the tip and tail.  This is perfect for creating a predictable carve, while allowing the ski to be lose, playful and not hang up when spinning.

Freedom Tip/Tail: A slight reduction in the width of the tip and or tail of the ski, beginning at the end of the skis side cut zone.  This makes the skis tip and tail very loose and non-directional in powder because the ski isn't trying to follow the lead of the side cut.

Dope Sick Ollie Zone: We remove just a small amount of wood from the core directly before and after the binding mount zone.  This gives the skis a very reliable flex and pop. 

FlyLite Tip and Tail: This is a method of eliminating excess weight from the tip and tail of our skis, this makes our swing weight really light.

Anti-torsion Tip and Tail: We designed our cores to meet with other tip and tail materials in a geometry that makes them twist less and flex uniformly with the rest of the ski.

Anti-Vibration Edges: All of our skis are laid up with rubber dampening foil.  This absorbs excess vibrations and gives the ski a calm and predictable high speed ride.

Proprietary Rockwell Hardened Edges: Different hardness of steel specific to the skis intended use.

Pro Tuned Base and edges: We tune all skis to there intended use.  Different base structures, and beveling angles makes each model perform to it's specific design.

 

Handmade skis in Colorado USA
  • c-facebook
  • c-tbird
Handmade skis in Colorado USA

For Skiers, By Skiers

  • Wix Twitter page

Twitter

  • c-facebook

Facebook

  • c-youtube

YouTube

  • google-plus-square
  • twitter-bird2-square
  • facebook-square

EllisON ALL RIGHTS RESERVED 2012-2013